Talent Register

Resume intake & technical review
OPEN POSITIONS

Product Engineer

SoC
Brings chips into production, finds root causes of yield loss and field failures, and closes the loop with foundry and OSAT partners.

Requirements: Familiarity with CP, FT, WAT, yield, and reliability data, and persistence in tracing failures to their physical cause.

Preferred: Volume production of high-speed interconnect or advanced-package products.
Apply for this job

IP Manager, Selection and Integration

SoC
Chooses and negotiates external UCIe, SerDes, SRAM, and foundation IP, and ensures smooth integration.

Requirements: Engineering-level evaluation of IP datasheets across performance, power, cost, verification effort, and integration risk.

Preferred: Negotiations with tier-one IP vendors or advanced-node IP bring-up.
Apply for this job

Chip Program Manager

SoC
Tracks chiplet program threads from specification to volume across design, package, test, and partners, and makes schedule-versus-quality trade-offs.

Requirements: Experience running ASIC or SoC programs through tape-out and distinguishing real risks early.

Preferred: Chiplet, advanced-package, or high-speed interconnect products taken into volume.
Apply for this job

Advanced Packaging Design Engineer

Package and SI/PI
Selects chiplet, 2.5D, FCBGA, and SiP solutions, and reviews substrate, interposer, and bump designs against SI/PI and thermal results through volume.

Requirements: Packaging design and simulation tool experience, and ownership of DFM, NPI, and volume ramp.

Preferred: CoWoS, Foveros, or hybrid bonding, or chiplet production work with OSATs.
Apply for this job

System Engineer, Chip Engineering

Package and SI/PI
Defines power, package, thermal, reliability, and manufacturability targets, and drives chip-package-board co-design.

Requirements: Package selection, SI/PI, thermal design, reliability qualification, and OSAT and substrate flow knowledge.

Preferred: Engineering experience with high-speed interconnect, chiplet, or advanced-package products.
Apply for this job

DFT Expert

Back-end (digital physical design / timing)
Architects DFT (scan, MBIST, ATPG, LBIST, boundary scan), including D2D test access, and supports bring-up and failure diagnosis.

Requirements: DFT tool experience, coverage optimization, and ATE pattern debug.

Preferred: Multi-die or chiplet DFT, known-good-die strategy, or volume yield improvement.
Apply for this job

BES Expert: Synthesis, STA and Formal

Back-end (digital physical design / timing)
Owns synthesis, static timing, and formal equivalence, and guards netlist, constraint, and closure quality.

Requirements: Synthesis, STA, and formal tool expertise, low-power design knowledge, and well-justified constraints.

Preferred: Advanced-node sign-off and closure of complex high-speed clocking schemes.
Apply for this job

Physical Implementation Expert

Back-end (digital physical design / timing)
Reviews floorplan, place and route, clock tree, timing, and physical verification, and sets back-end sign-off standards.

Requirements: Mastery of implementation, physical verification, and STA tools, and PPA optimization on large designs.

Preferred: Advanced nodes (FinFET or GAA) and chiplet or advanced-package back-end work.
Apply for this job

Digital Verification Manager

Digital
Sets verification strategy and quality gates, leads UVM environments, coverage closure, and tape-out sign-off, including mixed-signal checking.

Requirements: SystemVerilog, UVM, assertions, and formal methods.

Preferred: Verification of UCIe, D2D, SerDes, or PCS/FEC designs, including mixed-signal models.
Apply for this job

Digital IC Design Manager

Digital
Leads micro-architecture and RTL for UCIe adapter, PCS, FEC, and control blocks, and owns integration, PPA, CDC, and low power.

Requirements: Strong Verilog and SystemVerilog, micro-architecture judgment, and experience building and leading a design team.

Preferred: Tape-outs of UCIe, D2D, or 112G/224G SerDes digital logic.
Apply for this job

SI/PI and Channel Design Engineer

Package and SI/PI
Designs die-to-die channels in interposers and packages, models signal and power integrity, and sets design rules and sign-off criteria.

Requirements: Solid electromagnetics, hands-on 3D EM and system-level tools, PDN and power-noise analysis, and models that are passive, causal, and correlated to measurement.

Preferred: UCIe channel design on silicon interposers or bridges, or simulation-to-lab correlation for chiplet and advanced-package designs.
Apply for this job

Clocking Lead

High-speed PHY
Leads PLLs, clock distribution, phase interpolation, and CDR support, owning jitter from reference to sampler.

Requirements: Deep low-jitter PLL and clock design experience, phase-noise analysis skills, and tape-out leadership.

Preferred: Clocking for 112G/224G SerDes or multi-lane D2D interfaces.
Apply for this job

SerDes TX Lead

High-speed PHY
Leads transmitter design (drivers, FFE, serializers, output matching) with a focus on low power and jitter targets.

Requirements: Advanced-node high-speed TX design experience, including inductors/T-coils and ESD co-design, understanding of package and channel effects, and tape-out leadership.

Preferred: Lab-measured DAC-based or PAM4 transmitters at 112G or above.
Apply for this job

SerDes RX Lead

High-speed PHY
Leads receiver design (front end, CTLE, ADC or slicers, CDR) for 112G and 224G links.

Requirements: Hands-on high-speed receiver design, including on-die inductors and T-coils co-optimized with ESD, a clear view of noise, bandwidth, and linearity budgets, and experience leading a team through tape-out.

Preferred: Lab-measured ADC-based receivers at 112G or above.
Apply for this job

SerDes Algorithm Engineer

System modeling / algorithm / uArch
Develops equalization, adaptive control, nonlinearity compensation, and calibration algorithms for 112G and 224G links.

Requirements: Strong communication theory and DSP skills, and the habit of tracing errors to channel and circuit physics.

Preferred: Algorithms taken from model to silicon, or optical link experience such as LPO.
Apply for this job

Chip Architect, Chiplet Interconnect

System modeling / algorithm / uArch
Defines the protocol layer for die-to-die interfaces built on UCIe (link/adapter layers, flow control, retry, QoS).

Requirements: Deep D2D protocol knowledge, understanding of how protocols interact with SerDes and FEC, and first-principles performance and PPA modeling. Network architecture experience is also a good fit.

Preferred: A UCIe or other D2D interface delivered to working silicon.
Apply for this job

Communication Systems and Architecture Partner

Network and computer architecture
Owns system architecture across die, package, board, cable, and fiber, including electrical vs. optical choices and the scaling of links and protocols.

Requirements: Years of leading communication-system or interconnect architecture, fluency from the physical layer to the protocol layer, and sound trade-offs.

Preferred: Contributions to interconnect standards or architecture of products shipped at scale.
Apply for this job

AI Hardware-Software Co-design Partner

Network and computer architecture
Connects AI workload needs (bandwidth, latency, scale-up/scale-out topology) to the company's products and roadmap.

Requirements: Deep knowledge of AI training and inference systems, collective communication, and parallelism, plus the ability to translate between software teams and chip architects.

Preferred: Experience at an AI accelerator, GPU, or hyperscale company, or hands-on work with collective communication libraries or system-level performance modeling.
Apply for this job

HR Partner

Others
Builds the company's talent system from scratch: hiring, growth, rewards, and retention.

Requirements: Experience building HR at a fast-growing semiconductor or hardware company, a network among chip engineers, and the ability to work as a true partner to the founders.

Preferred: Recruiting senior mixed-signal, SerDes, or chip architecture talent; start-up equity and compensation design.
Apply for this job